I was printing some ABS on my modified Anycubic I3 Mega overnight, when I awoke to this horror of a destroyed glass print bed…

Now the question remains, how to actually fix this? One part is still firmly attached to the Bed and I fear this may destroy the Bed even more.

And I obviously need a new Print bed, but I can’t find the exact replacement, so should I even get a replacement Ultrabase? I saw that there are magnetic PEI beds available, but I am unsure if it is worth the 80-100€ for this.

Edit: Since the glass is glued to the 1.5mm aluminium heater PCB (and I already had to resolder the broken off wires once) I was looking at complete replacements at first, which why the price is relatively high

  • dual_sport_dork 🐧🗡️@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 day ago

    I’m assuming glass printer beds are supposed to be tempered, and just an FYI for you or anyone else attempting the hardware store or score-it-yourself method, the glass you wind up with will not be tempered and will also have exceedingly sharp edges and corners. If you have access to a belt sander with a suitably fine belt you can at least round off the sharp bits.

    Untempered glass probably won’t deal with thermal loading very well, either. It might work, and it’ll be cheap, but prepare for disappointment.