Alphane Moon@lemmy.worldM to Hardware@lemmy.worldEnglish · 3 days agoResearchers embed digital 'fingerprints' into 3D printed parts — tech may make future ghost guns more traceablewww.tomshardware.comexternal-linkmessage-square15fedilinkarrow-up157arrow-down15cross-posted to: 3dprinting@lemmy.world
arrow-up152arrow-down1external-linkResearchers embed digital 'fingerprints' into 3D printed parts — tech may make future ghost guns more traceablewww.tomshardware.comAlphane Moon@lemmy.worldM to Hardware@lemmy.worldEnglish · 3 days agomessage-square15fedilinkcross-posted to: 3dprinting@lemmy.world
minus-squareBlue_Morpho@lemmy.worldlinkfedilinkEnglisharrow-up11arrow-down1·3 days agoI assume they add a custom wiggle to the print head so the “serial” is embedded into the plastic everywhere inside and out.
minus-squareBotsRuinedEverything@lemmy.worldlinkfedilinkEnglisharrow-up1arrow-down5·3 days agoExactly. So if that wiggle gets sanded off you have effectively anonymized your part
minus-squareBlue_Morpho@lemmy.worldlinkfedilinkEnglisharrow-up5·3 days agoThe wiggle isn’t only on the surface. I’d bet it is everywhere except for the surface or users would complain about defects. So if you sand the surface, the forensics slices it in half and reads the wiggle that is embedded everywhere inside.
minus-squareBotsRuinedEverything@lemmy.worldlinkfedilinkEnglisharrow-up4·2 days agoHa. I’ll bet you’re 100% correct.
I assume they add a custom wiggle to the print head so the “serial” is embedded into the plastic everywhere inside and out.
Exactly. So if that wiggle gets sanded off you have effectively anonymized your part
The wiggle isn’t only on the surface. I’d bet it is everywhere except for the surface or users would complain about defects. So if you sand the surface, the forensics slices it in half and reads the wiggle that is embedded everywhere inside.
Ha. I’ll bet you’re 100% correct.